
            S O F T W A R E - R E L E A S E - D O C U M E N T

                 Hirschmann Automation and Control GmbH
              
            	      RSP Release 08.7.00
            		
                            2021/03/31
             		
                          C O N T E N T S
                          ===============


    1.   Limitations of the release RSP 08.7.00
    2.   Supported Hardware
    3.   History of Changes

   

This document is delivered with the software in the file 
"Readme_RSP.08.7.00.txt".

 

.-----------------------------------------------------------------------------.
| For superior functions like software update,                                |
| supported web browser and limitations of the platform release 08.7.00       | 
| please read the document Readme_08.7.00.txt.                                |
'-----------------------------------------------------------------------------'



1. Limitations of the release RSP 08.7.00
=============================================
After updating a RSP-2A device to the HiOS 04.0.00 release the settings on 
LAG, HSR and PRP ports will be lost.
Before performing the update please save the configuration as a script first 
and apply it again after the device is running with the HiOS 04.0.00 release. 

   
2. Supported Hardware
=====================
This platform software release 08.7.00 is released exclusively for the 
following hardware:

HiOS-RSP-08700.bin:
- RSP20
- RSP30
- RSP25
- RSP35

HiOS-RSP-MRP-08700.bin:
- RSP25
- RSP35

HiOS-RSP-PRP-08700.bin:
HiOS-RSP-HSR-08700.bin:
- RSP25 (hardware revision 2 unrestricted, for hardware revision 1 permissible up to +60 Celsius or +140 Fahrenheit ambient temperature)           
- RSP35 (hardware revision 2 unrestricted, for hardware revision 1 permissible up to +60 Celsius or +140 Fahrenheit ambient temperature) 

HiOS-RSP-DLR-08700.bin: (Since version 05.0.00)
- RSP25 (with Hardware configuration "D")
- RSP35 (with Hardware configuration "D")

HiOS-RSP-NAT-08700.bin:
- RSP25 with 3S software
- RSP35 with 3S software

Supported Software Level:
- 2S (since HW Revision 3)
- 2A
- 3S
 
For information on supported accessories, refer to the "User Manual Installation".
You will find the manuals under "https://www.doc.hirschmann.com". 
 
3. History of Changes
=====================

Software Release 03.0.00
------------------------
First version


Software Release 04.0.00
------------------------
Bugfixes (see Issue List)

New functions: 
- JumboFrames (12288 Byte Frames)
- Subring Manager
- Manual LED signalling

Software Level 3S:
- Loopback interface (2)
- Static routing (40 Entries)
- Port based routing
- VLAN based routing
- Routing templates
- VRRP
- HiVRRP
- VRRP tracking
- Net directed broadcasts
- ICMP Router Discovery (IRDP)
- Static route tracking
- Static reject routes
- Proxy ARP
- Static ARP entries
- Selective ARP Learning
- IGMPv1,IGMPv2,IGMPv3
- IGMP Proxy
- ICMP filter
- Configurable IP MTU
- BOOTP/DHCP layer 3 relay
- IP/UDP helper


Software Release 05.0.00
------------------------
Bugfixes (see Issue List)

New Functions: 
- Device Level Ring (DLR) (with Hardware configuration "D" and software with DLR support)
- HiDiscovery v2 server
- EtherNet/IP Protocol
- Modbus TCP
- PROFINET Protocol
- Port Monitor Overload detection
- Port Monitor Link Speed and Duplex Monitor
- Port Mirroring N:1
- System resource monitor
- CLI script download over HTTP(S)
- Management MAC Address Conflict Detection
- DHCP server pools for multicast requests
- RSPAN
- VLAN mirroring
- HIPER-Ring Client (Ring Switch)
- LDAP
- Extended ACL filter

Software Level 3S:
- OSPFv2
- RIPv1, RIPv2


Software Release 06.0.00
------------------------
Bugfixes (see Issue List)

New Functions:
- Syslog over TLS
- RSTP over HSR (with software with HSR support)
- Configurable fixed MRP redundant port
- Redundant Coupling Protocol (RCP)
- Ring/Net Coupling
- TLS 1.2
- FTP Client
- RSTP Ring Only Mode
- Link Loss Alert
- Web: Port Tooltip
- Upload certificate for mail server
- Subring with Link Aggregation
- GMRP
- GVRP

Software Level 3S:
- 1:1 NAT
- OSPF fast Hello mode


Software Release 06.1.00
------------------------
Bugfixes (see Issue List)

New Functions:
- Option to allow management on probe port
- Multiple Spanning Tree

Software Level 3S:
- Select source interface for copy commands and Radius


Software Release 07.0.00
------------------------
Bugfixes (see Issue List)

New Functions:
- HTML5-based Graphical User Interface
- Backup the Config on a Remote Server
- Clear Config Keep IP
- HSR over Gigabit (with hardware revision 2 and software with HSR support)
- MAC Authentication Bypass Format Options

Software Level 3S:
- ACD for Router Interfaces
- Source-Routing can be activated/deactivated

Software Release 07.0.04
------------------------
Bugfixes (see Issue List)

Changed Functions:
- Import / Export CLI scripts via grafical user interface.
- SSH: support for new ciphers.
- SSH: DSA auth. key support removed.
- PRP over Gigabit (with hardware revision 2 and software with PRP support)

Software Release 08.0.00
------------------------
Bugfixes (see Issue List)

New Functions:
- Automatic login by HiVision
- CLI script load on boot 
- Changed defaults: SNMPv1/v2 and telnet are disabled.

Software Release 07.1.00 and 08.1.00
------------------------------------
Bugfixes (see Issue List)

New Functions:
- Password change on first login
  Protocols that require a login (e.g. SNMPv3) remain deactivated until the password is changed. 

Software Release 08.4.01
------------------------
Bugfixes (see Issue List)

New Functions:
- BOOTP/DHCP options (DHCP client) can be switched off.
- Display delivered PoE current in mA (additional to the power in W).

Software Level 2A/3S:
- Display differences to default configuration in the graphical user interface.
- New parameter "index" in the CLI for adding and deleting ACL rules. 

Software Release 08.6.00
------------------------
Bugfixes (see Issue List)

New Functions:
- OPC UA Server
- Protocol packet statistics

Software Release 08.7.00
------------------------------------
Bugfixes (see Issue List)

New Functions: 
Software Level 2A/3S:
- Loop-Protection function

Software Release 08.7.00
------------------------
Bugfixes (see Issue List)
